Agro-Waste Generated Pd/CAP-Ash Catalyzed Ligand-Free Approach for Suzuki–Miyaura Coupling Reaction

Catalysis Letters - We converted agro-waste Custard Apple Peels (CAP) to ash via thermal treatment, on which Pd(OAc)2 was immobilized easily that produced a low-cost, highly efficient Pd/CAP-ash...     

催化剂级配技术在加氢改质装置上的工业应用

基于柴油产品质量升级的需求,中国石化大连石油化工研究院(FRIPP)开发了FHIDW加氢改质技术及配套FF-46加氢精制催化剂、FC-14B加氢改质催化剂和FDW-3临氢降凝催化剂.该技术及催化剂级配体系在格尔木炼油厂0.8 Mt·a-1加氢改质装置上的工业应用情况表明,级配催化剂体系对原料适应性强,装置运转平稳,操作灵活性高,催化剂失活速率慢,产品分布合理且质量优异,在降低柴油产品凝点的同时可以明显改善其密度和十六烷值,解决了改造前装置生产重柴油密度偏低的问题,为炼油厂生产符合国V质量标准的柴油提供了技术保障.     

微电路模块灌封工艺研究

针对某款微电路模块在组装过程中存在的质量隐患以及在试验中存在的振动、散热、短路等质量可靠性问题,调整微电路模块的灌封方案,通过对比三种灌封-元器件焊接组合,得到最优灌封方案,确定灌封胶制备、灌胶填充和灌封胶固化等核心步骤的工艺条件。在灌封胶量确定和灌封工艺过程控制中,通过筛选和鉴定检验的典型试验,验证该微电路模块灌封工艺方案的可靠性。实验结果表明,利用灌封胶改善了绝缘、散热、耐温、防震作用,解决了该微电路模块在组装过程中存在的质量隐患及产品可靠性问题。     

Water Pipeline Leak Measurement Using Wavelet Packet-based Adaptive ICA

Water Resources Management - The localization of the leaks is estimated using the time difference method in the past decade. Generalized and Basic Cross-correlation techniques are frequently...     

澜沧江流域不同茶区晒青茶品质比较

为深入了解云南澜沧江流域不同茶区晒青茶的品质差异，选取比较澜沧、双江2个茶区的24个乡镇晒青茶样，采用感官审评与品质理化成分检测，分析不同茶区晒青茶主要理化成分和感官品质方面存在的差异。结果表明：澜沧、双江2个茶区晒青茶的茶多酚平均值分别为24.43%、23.18%；游离氨基酸平均值分别为2.72%、3.97%；咖啡碱平均值分别为4.90%、4.48%；水浸出物平均值分别为45.67%、44.29%；酚氨比均值分别为9.40、6.07。澜沧、双江2个茶区不同产地的晒青茶茶多酚、游离氨基酸、咖啡碱、水浸出物和酚氨比之间存在一定差异。不同的内含化学成分，使各茶区的晒青茶感官品质明显不同。澜沧茶区的晒青茶滋味整体较醇和、稍涩，部分稍带花香与焦味；双江茶区的晒青茶整体滋味较浓醇、微涩带苦，部分平和。     

Flow field simulation and pressure drop modeling by a porous medium in PEM fuel cells

For proton-exchange membrane fuel cells, the distribution of reactant flow in the stack is critical to the fuel cell's efficiency. The uneven distribution of reactant flow in the stack may cause poor current density, low performance, and material degradation. To understand and accurately predict the flow field in the proton-exchange membrane fuel cell system, the present study aims to develop a simple correlation to analyze the pressure drop in fuel cell stacks. The flow channel in each cell of a stack is treated as a porous medium, and a power-law model is used to approximate the porous medium momentum source term. For the stacks with fewer cell numbers, namely, 1, 5, and 10 cells, the parameters in the power law are established based on the experimental data. Then, a correlation is developed to simulate the flow and predict the pressure drop in the stack with higher cell numbers (ie, 20 and 40 cells). The simulations show that the pressure drop in each cell of a stack is almost invariable, and the average pressure drop decreases with increasing the number of cells. The flow uniformity in the stacks with different cell numbers is evaluated using the dimensionless pressure drop and the pressure drop ratios. It suggests that the lower the cell number, the more uniform the pressure drop. The developed model is conducive to efficiently designing the flow channel for a fuel cell stack with large cell numbers.     

Low Temperature Characteristics of the Metal–Superconductor NIS Tunneling Thermometer

We discuss the temperature dependence of a common low temperature local thermometer, a tunnel junction between a superconductor and a normal metal (NIS junction). Towards the lowest temperatures its characteristics tend to saturate, which is usually attributed to selfheating effects. In this technical note, we reanalyze this saturation and show that the temperature independent subgap current of the junction alone explains in some cases the low temperature behavior quantitatively.